It knows when to rest — and when to roll.
Your CO-DRIVER goes to sleep on its own when the car stops. But if you do need to power it off — or back on — here's exactly how.
Do I need to turn off my CO-DRIVER when I leave the car?
We strongly advise against turning off your CO-DRIVER when you leave the car — it would require you to manually turn it back on every time. Instead, the device automatically enters a power-saving sleep mode when the car is parked, and wakes itself up as soon as you start moving again.
How do I turn my CO-DRIVER off or on?
The button and timing differ slightly between models. Select yours below.
Turning off and on
On the CO-DRIVER NO3, everything happens with the top button — and the display shows you what's going on.
Press and hold the top button for about 3–5 seconds until the device turns off.
Press and hold the top button for about 3–5 seconds. The OOONO logo appears on the display. Once your CO-DRIVER NO3 has reconnected to your phone, you'll hear a short connection sound and see a small green dot at the top of the display.
Turning off and on
It's not necessary to turn off your CO-DRIVER when you leave your car. The device automatically enters sleep mode when the car is parked and switches back to active mode as soon as you start moving.
Press and hold the top button for 10–15 seconds. You'll hear a sound and see a red flashing LED when it powers off.
Press and hold the top button for 10–15 seconds until you hear a sound and see a green flashing LED. Then open the OOONO app and give the device a shake to re-establish the connection.
Turning off and on
We strongly advise against turning off the CO-DRIVER NO1 when you leave the car — it requires you to manually turn it back on again. The automatic sleep mode is the better option.
Press and hold the OOONO button for approximately 20 seconds. You'll hear a sound and see a red flashing LED when it powers off.
Press and hold the OOONO button for 15–20 seconds until you hear a sound and see a green flashing LED. Then open the OOONO app and give the device a shake to re-establish the connection.