How do I change the time and date on my P-DISC?

Need to change the settings on your OOONO P-DISC? No problem - you can easily navigate the menu using the buttons on the back of the device.

To get model-specific instructions, simply click on the P-DISC version you want to learn more about:

P-DISC NO3

P-DISC NO2

P-DISC NO1

P-DISC NO3

1. Manually set time and date

2. Turning off the device

3. Daylight saving time

4. Overnight Parking

Manually set time and date

When you activate the P-DISC NO3 for the first time, the time and date are automatically set. However, you can also manually adjust the time & date by following these simple steps:

1. Push and hold (O) for around 3 seconds until the numbers in the display starts flashing.
2. Start out by setting hours. Use (˄) to adjust and click (O) to confirm. Hold (Λ) to use fast scroll.
3. Then set the minutes. Use (˄) to adjust and click (O) to confirm.
4. Move on to set the year. Use (˄) to adjust and click (O) to confirm.
5. Next, set the month. Use (˄) to adjust and click (O) to confirm.
6. Lastly, set the date. Use (˄) to adjust and click (O) to confirm. If you accidentally pressed too far, press and hold (˄) to use fast scroll.

When the above steps have been followed successfully, your P-DISC NO3 will emit a sound to confirm that it is set up correctly. Your P-DISC NO3 is now ready to use.

Please note that it is not possible to change the 30-minute parking interval on the P-DISC NO3.

How to turn off the device

We recommend not turning off the P-DISC NO3. If you still want to turn off the device, hold the (O) button for around eight seconds.

A red light at the back of the device and a sound will confirm that the P-DISC NO3 is turned off.

To turn it back on, simply hold the (O) button for around three seconds.

Daylight Saving Time

By default, your P-DISC NO3 is set to automatically switch back and forth to Daylight Saving Time (DST).

In case daylight saving time is abolished, you can deactivate this function:

1. Hold down the (O) button and the (˄) button simultaneously for three seconds Until “d on” (DST = Daylight saving time) appears.
2. Use the (˄) button to deactivate the daylight-saving time (“d off”).
3. Confirm your selection with the (O) button.

A sound indicates that your change has been successfully saved.

Overnight Parking

Parking your car in the evening and wondering if you need to manually adjust your P-DISC for the next morning? No need – and it’s actually not allowed.

Your P-DISC automatically displays the parking time when you park, even if it’s in the evening. That time stays on the display until you drive again. If parking restrictions only start the next morning, the allowed parking time begins from the moment the rule takes effect. There’s nothing you need to change.

When can I set the time manually?

Only if no parking time is shown - for example, after a very short trip that didn’t trigger parking mode. In that case, you can use the arrow button to manually set the time, but only to the next allowed interval. Setting a later time than permitted is not allowed. 

P-DISC NO2

1. Manually set time and date

2. Daylight Saving Time

3. Overnight Parking

Manually set time and date

1. Push and hold (O) for around 3 seconds until the numbers in the display starts flashing.
2. Start out by setting hours. Use (˄) to adjust and click (O) to confirm.
3. Then set the minutes. Use (˄) to adjust and click (O) to confirm.
4. Move on to set the year. Use (˄) to adjust and click (O) to confirm.
5. Next, set the month. Use (˄) to adjust and click (O) to confirm.
6. Lastly, set the date. Use (˄) to adjust and click (O) to confirm.

When the above steps has been followed successfully, your P-DISC will emit a sound to confirm that it is set up correctly. Your P-DISC NO2 is now ready to use.

Daylight Saving Time

By default, your P-DISC NO2 is set to automatically switch back and forth to Daylight Saving Time (DST). This function can be disabled.

1. Push and hold the (˄) button and (O) button simultaneously for around 3 seconds, until you see either "don" or "doff" on the screen of your P-DISC NO2.
2. Use the (˄) button to navigate the menu, and select either DST ON (don) or DST OFF (doff). Use the (O) button to confirm your choice and exit the menu.

Overnight Parking

Parking your car in the evening and wondering if you need to manually adjust your P-DISC for the next morning? No need – and it’s actually not allowed.

Your P-DISC automatically displays the parking time when you park, even if it’s in the evening. That time stays on the display until you drive again. If parking restrictions only start the next morning, the allowed parking time begins from the moment the rule takes effect. There’s nothing you need to change.

When can I set the time manually?

Only if no parking time is shown - for example, after a very short trip that didn’t trigger parking mode. In that case, you can use the arrow button to manually set the time, but only to the next allowed interval. Setting a later time than permitted is not allowed. 

P-DISC NO1

1. Set time and date

2. Set parking interval

3. Overnight Parking

Set time and date

1. Press and hold the (O)-button for a few seconds until the numbers start flashing.
2. Set hours with the (< / >) buttons and press the (O) button once to confirm. Set minutes in the same manner. Confirm the time and continue by pressing the (O) button.
3. Select “DST” (Daylight Saving Time) to choose automatic adjustment between winter time and daylight saving time. The P-DISC NO1 is preset to ON. If automatic adjustment is not preferred, then select “nDST” (No Daylight Saving Time) with the help of the (< / >) buttons. Press the (O) button to continue and confirm.
4. If “DST” is on, set the year, month, and date, with the help of the (< / >) buttons. Press the (O) button to continue and confirm.
   The parking disc is now set.

Set parking interval

1. Press and hold down the (O) button on your P-DISC NO1 for a few seconds until the numbers start flashing - You are now in the settings-menu.
2. While at it, confirm the time is correct and press (O) to skip to the next setting in the settings-menu. Proceed by skipping through time, daylight saving time, and date with the (O) button. Once the date and year has been set, you will be able to set the parking interval.
3. Now you can adjust it to your preference. The default setting is 15 minutes, but can be changed to either 1 minute or 30 minutes. Navigate between the options with the “<” and “>” buttons.

We encourage you to always check that you are compliant with the local parking interval to ensure that your parking disc is displaying the parking time correctly.

Overnight Parking

Parking your car in the evening and wondering if you need to manually adjust your P-DISC for the next morning? No need – and it’s actually not allowed.

Your P-DISC automatically displays the parking time when you park, even if it’s in the evening. That time stays on the display until you drive again. If parking restrictions only start the next morning, the allowed parking time begins from the moment the rule takes effect. There’s nothing you need to change.

When can I set the time manually?

Only if no parking time is shown - for example, after a very short trip that didn’t trigger parking mode. In that case, you can use the arrow button to manually set the time, but only to the next allowed interval. Setting a later time than permitted is not allowed. 

Couldn’t find what you were looking for or want to learn more about other OOONO products?

How do I customize warning settings in the app?

Looking for similar articles for the P-DISC?

Why isn't anything showing on the display of my P-DISC?