Skip to main content

How do I setup my SIRÈNE?

  • Updated

Let’s get your SIRÈNE set up correctly.

Just follow the steps below for a smooth and easy setup.

 

1. Download the Sirène App

To get started, download the SIRÈNE app from the App Store or Google Play Store:

Important! The app requires iOS 16 or later, or Android 12 or later. For more information, have a look at: Is my phone compatible with the SIRÈNE app?

 

2. Enable Bluetooth

Make sure Bluetooth is activated on your phone. This is essential for your SIRÈNE to work.

 

3. Complete Onboarding in the App

Open the app and follow the on-screen instructions to complete the onboarding process.

Important: Allow the app to always access your location. This doesn’t mean your location is constantly tracked — it simply allows SIRÈNE to share your location immediately when you trigger an alert, without asking for permission every time.

 

4. Pair Your SIRÈNE

When prompted during onboarding:

  1. Press and hold the metal ball on your SIRÈNE for 3–5 seconds.
  2. A green blinking light on the LED ring will confirm a successful connection.

Once connected, your SIRÈNE will automatically pair with your phone whenever it moves — as long as Bluetooth is enabled and your phone settings are correct.

Note: Your SIRÈNE only works when it’s connected to your phone.

hand_sirene_click_v3.jpg

hand_connect_sirene_eng.jpg

5. Automatic Connection

With setup complete, your SIRÈNE will connect automatically whenever Bluetooth and the required phone settings are active on your phone.

  • Green blink every 3 seconds = connected ✅
  • Red blink every 3 seconds = not connected ❌

If your SIRÈNE shows a red blink:

  1. Make sure it's close to your phone.
  2. Confirm Bluetooth is on.
  3. Press and hold the metal ball until the green light returns.
  4. Try charging the device for 1-2 hours.