P-DISC NO4

First-time activation

• ✓
  Hold the (O) button on the back of the device for about 3 seconds.
• ✓
  The P-DISC NO4 emits a sound and the back light briefly flashes green — the device is now active and showing the factory-set time. After 10 seconds you'll hear another sound, and it will start displaying the parking time.

Manually adjusting the settings

1. 1
   Hold (O) for ~3 seconds until the numbers on the display start flashing.
2. 2
   Set the hours — use (^) to adjust, press (O) to confirm.
3. 3
   Set the minutes — use (^) to adjust, press (O) to confirm.
4. 4
   Set the year (Y) — use (^) to adjust, press (O) to confirm.
5. 5
   Set the month (M) — use (^) to adjust, press (O) to confirm.
6. 6
   Set the date (D) — use (^) to adjust, press (O) to confirm.

Your P-DISC will emit a confirmation sound when setup is complete. The P-DISC NO4 is now ready to use.

P-DISC NO3

First-time activation

• ✓
  Hold the (O) button on the back of the device for about 3 seconds.
• ✓
  The P-DISC NO3 emits a sound and the back lights briefly flash green — the device is now active and showing the factory-set time. After 10 seconds you'll hear another sound, and it will start displaying the parking time.

Manually adjusting the settings

1. 1
   Hold (O) for ~3 seconds until the numbers on the display start flashing.
2. 2
   Set the hours — use (^) to adjust, press (O) to confirm.
3. 3
   Set the minutes — use (^) to adjust, press (O) to confirm.
4. 4
   Set the year (Y) — use (^) to adjust, press (O) to confirm.
5. 5
   Set the month (M) — use (^) to adjust, press (O) to confirm.
6. 6
   Set the date (D) — use (^) to adjust, press (O) to confirm.

Your P-DISC will emit a confirmation sound when setup is complete. The P-DISC NO3 is now ready to use.

P-DISC NO2

The first time you set up the P-DISC NO2, you need to set the exact time and date so it can set the parking time automatically. The device has two buttons: one to navigate the settings menu and one to confirm.

Setting time and date

1. 1
   Hold (O) for ~3 seconds until the numbers on the display start flashing.
2. 2
   Set the hours — use (</>) to adjust, press (O) to confirm.
3. 3
   Set the minutes — use (</>) to adjust, press (O) to confirm.
4. 4
   Set the year — use (</>) to adjust, press (O) to confirm.
5. 5
   Set the month — use (</>) to adjust, press (O) to confirm.
6. 6
   Set the date — use (</>) to adjust, press (O) to confirm.

Your P-DISC will emit a confirmation sound when setup is complete. The P-DISC NO2 is now ready to use.

P-DISC NO1

The P-DISC NO1 sets parking time automatically once the current time and date are configured correctly.

Turn on and set time

1. 1
   Detach the parking disc from the clear plastic holder — it will switch on automatically and numbers will appear in the display.
2. 2
   Press and hold (O) for a few seconds until the numbers start flashing.
3. 3
   Set the hours with the (</>) buttons, then press (O) to confirm. Set the minutes in the same way.
4. 4
   Select DST for automatic summer/winter time adjustment (factory default: ON). If you prefer no automatic adjustment, select nDST using the (</>) buttons. Press (O) to confirm.

Set date and parking interval

1. 1
   If DST is on, set the year, month, and date using the (</>) buttons. Press (O) to confirm each.
2. 2
   The parking interval is set to 0:15 by default. You can change it to 0:30 (30 min) or 0:00 (1 min) using the (</>) buttons. Press (O) to confirm and finish setup.

Related articles